Request a quote

Insights

SCC, VCA and SGU: What the Safety Certificates Mean and What to Ask For

SCC (in Germany and Austria) and VCA (in the Netherlands and Belgium) are safety, health and environment schemes for contractors working on industrial sites. Each has two layers: a company certificate for the contractor's management system and personnel certificates for individual workers and supervisors – in German-speaking countries the personnel exams are called SGU exams. A buyer should always check which of the two layers a certificate covers.

Published Publisher Onezone s.r.o.

SCC / SGU certificate, HSE examination for operational employees, certificate 1 – scanned document

01 / Article

SCC and VCA are certification schemes that industrial clients use to check whether contractors work safely. They matter most in refineries, chemical plants, power stations and other large industrial sites, but many manufacturers and main contractors ask for them too. This guide explains the terms as of 20 November 2026 and shows what to ask a subcontractor for. Scheme rules change, so the linked scheme owners remain the reference.

What is SCC?

SCC stands for Sicherheits Certifikat Contraktoren. The Austrian SCC platform of the Federal Economic Chamber (WKO) describes it as a certifiable occupational health and safety management system that combines safety, health and environmental protection – in German Arbeitssicherheit, Gesundheits- und Umweltschutz, abbreviated SGU. It was developed in the petrochemical industry for companies working as contractors.

In Germany the scheme owner changed in 2021: according to the DGMK, which set the SCC rules from 2010 to 2021, the association VAZ e.V. has been the sole owner of the SCC programmes in Germany since the end of 2021. With the 2021 revision, the former single rulebook was split into two programmes: SCC-VAZ 2021 for management systems and SGU-Personal 2021 for the certification of persons.

How do VCA and SCC relate?

VCA stands for Veiligheid, Gezondheid en Milieu (VGM) Checklist Aannemers. It was developed in the Netherlands in 1994, and the foundation SSVV (Stichting Samenwerken Voor Veiligheid) has developed and managed the VCA system since then. SCC is the adaptation to German law; Austria later adapted it to Austrian law. The WKO notes that VCA corresponds to SCC and that a European SCC platform of the sector committees from Belgium, Germany, the Netherlands and Austria works on the comparability and mutual recognition of the systems.

In practice, clients in Germany or Austria typically ask for SCC and clients in the Netherlands or Belgium for VCA. Whether a certificate from one scheme is accepted in the other is decided by the client.

What do the company certificate levels mean?

The Austrian scheme description lists four company certificates, each valid for three years with surveillance audits at least once a year:

  • SCC∗: a restricted certificate for small companies with, on average, up to 35 employees that do not use subcontractors for technical services;
  • SCC∗∗: an unrestricted certificate for companies with more than 35 employees, or smaller companies that use subcontractors;
  • SCCP: the unrestricted certificate with additional requirements for the petrochemical industry and refineries;
  • SCP: a certificate for staffing providers.

The Dutch scheme owner describes the VCA equivalents in the same way: VCA∗ for companies without subcontractors, VCA∗∗ for companies that work with subcontractors and VCA Petrochemie for companies active in the petrochemical industry.

What is an SGU personnel certificate?

A personnel certificate shows that one person passed an exam; it says nothing about the employer's management system. In the SCC system there are two levels:

  • Document 017: SGU exam for operational managers, such as supervisors and site managers;
  • Document 018: SGU exam for operational employees, such as fitters and skilled workers.

In everyday language both are often called an "SCC certificate", and in Austria and Germany the term SGU certificate is common. According to VAZ, the validity of the SGU exam certificates for operational employees (Documents 016 and 018) and for operational managers (Document 017) was shortened to five years when VAZ took over the programmes; TÜV SÜD likewise states five years for the Document 018 certificate. VAZ also states that from 1 November 2026 certificates and evidence issued under the old SCC 2011 rules are no longer accepted in certification procedures under SCC-VAZ 2021 or by plant operators.

The Dutch equivalents are diplomas: B-VCA (basic safety) is intended for anyone who does risky work or works in a risky environment, and VOL-VCA for operational supervisors and self-employed subcontractors working for a VCA-certified company. SSVV states that both diplomas are valid for ten years, and its VCA company certificates for three years.

What should a buyer ask a subcontractor for?

  • Which layer: a company certificate (SCC∗, SCC∗∗, SCCP, VCA∗, VCA∗∗) or personnel certificates for the people who will be on site – or both.
  • Level and scope: the level must match what your site rules require, for example SCC∗∗ if the subcontractor itself uses subcontractors.
  • Issuer: the name of the accredited certification body.
  • Names and dates: for personnel certificates, the names on the certificates should match the team list, and each certificate should be valid for the whole project.
  • Copies before mobilisation: ask for the certificates with the offer or before the first day, not at the gate.

How do you check and read a certificate?

  • VCA company certificates are registered by the certification body in SSVV's Central Certificate Register, where clients can check whether a company holds the certificate.
  • VCA diplomas can be checked in SSVV's Central Diploma Register.
  • SCC-VAZ and SGU-Personal certificates (Documents 017 and 018) in Germany: VAZ checks the validity of a certificate on request. Its self-check list for SGU personnel certificates asks whether the certificate shows the DAkkS logo, the SCC-VAZ logo and the logo of the certification body, names the person with date of birth, date and place of the exam and the document (017 or 018), carries the signature of the head of the certification body and is A4 in size.
  • Austria: the WKO SCC platform has pages on certified companies and on the validity of certificates.

Which certificate does Onezone hold?

Onezone s.r.o.'s certifications page shows an SCC / SGU certificate described as an HSE examination for operational employees, with two certificate scans. These are personnel certificates for operational staff; the page does not list a company-level SCC or VCA certificate. Alongside it, the page shows liability insurance of €2,000,000 per claim (Allianz) and electrical qualifications. For teams on industrial sites, see electrician teams in Europe, or contact us with questions about the documents.

Frequently asked questions

Is SCC the same as VCA?

They are closely related schemes. VCA was developed in the Netherlands in 1994 and SCC is its adaptation to German and Austrian law. According to the Austrian SCC platform, VCA corresponds to SCC. Whether a client accepts one in place of the other is the client's decision.

What does SGU stand for?

SGU stands for Arbeitssicherheit, Gesundheits- und Umweltschutz – occupational safety, health and environmental protection. SGU exams under Documents 017 and 018 are the personnel exams of the SCC system.

Is a personnel SCC certificate enough?

It depends on the client. A personnel certificate proves that an individual passed an exam. Some clients also require the contractor's company certificate (for example SCC∗ or SCC∗∗); the site rules or the tender documents say which is needed.

How long are the certificates valid?

According to the Austrian scheme description, SCC company certificates are valid for three years with annual surveillance. VAZ states five years for SGU personnel exam certificates (Documents 016, 017 and 018); TÜV SÜD gives the same for Document 018. SSVV states ten years for the B-VCA and VOL-VCA diplomas and three years for VCA company certificates. According to VAZ, certificates issued under the old SCC 2011 rules are no longer accepted in Germany from 1 November 2026. Always check the date printed on the certificate.

Where can I verify a certificate?

VCA company certificates in SSVV's Central Certificate Register and VCA diplomas in its Central Diploma Register. For SCC-VAZ and SGU-Personal certificates in Germany, VAZ checks validity on request at scc-zertifikat@vaz-ev.de.

03 / Contact

Contact Us Today

Our experienced team of electricians, mechanics, and technicians is ready to support your project with expertise and precision. Trust your electrical installation and assembly needs to professionals who prioritize quality, reliability, and a tailored approach. Contact us today!